BCWPR - PRIMER COATING, 37875 WHITE
- MSDS: BCWPR
- Manufacturer: CORONADO PAINT COMPANY INC
- Product Name: PRIMER COATING, 37875 WHITE
- National Stock Number: 8010-00-059-8822
Product Identification
Product ID:PRIMER COATING, 37875 WHITE
MSDS Date:01/01/1985
FSC:8010
NIIN:00-059-8822
MSDS Number: BCWPR
Responsible Party
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 52%
LINSEED & ALKYD RESINS
Fraction By Weight: 26%
AROMATIC & ALIPHATIC HYDROCARBONS
Fraction By Weight: 20%
ACGIH TLV: 100PPM
LEAD NAPHTHENATE
Fraction By Weight: 0.5%
Hazards
Effects of Overexposure:SEVERE EYE IRRITATION, DRYING OF SKIN.
EXCESSIVE INHALATION CAUSES HEADACHE, DIZZINESS, NAUSEA.
First Aid
First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH MILD SOAP AND WATER
AND APPLY SKIN CREAM. INHALATION: REMOVE TO FRESH AIR AND CALL A
PHYSICIAN. APPLY ARTIFICIAL RESPIRATION IF NECESSARY.
Fire Fighting
Flash Point:90F, SETA
Lower Limits:0.9
Upper Limits:7.0
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:TREAT AS CLASS B FIRE.
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURE WITH
AIR.
Accidental Release
Spill Release Procedures:WEAR A RESPIRATOR. FLUSH WITH WATER INTO
RETAINING AREA OR CONTAINER. AVOID EXPOSUREO SPARKS, FIRE OR HOT
METAL SURFACES.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME. USE WITH ADEQUATE VENTILATION. AVOID PROLONGED OR PEATED
CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:SELF CONTAINED NIOSH APPROVED PROTECTION IF TLV
IS EXCEEDED
Ventilation:LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:EYE BATH AND SAFETY SHOWER
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:240F
Vapor Pres:6
Vapor Density:3.7
Spec Gravity:1.35
Evaporation Rate & Reference:0.7, BUAC=1
Solubility in Water:VERY SLIGHT
Appearance and Odor:WHITE OPAQUE LIQUID, PETROLEUM DISTILLATE ODOR
Percent Volatiles by Volume:38
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES OR FIRE
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE
Disposal
Waste Disposal Methods:LANDFILL, INCINERATION UNDER SAFE AND SUPERVISED
CONDITIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.